DeatschWerks
Dynamic Injector Service and Advanced Testing Procedures

DeatschWerks has offered fuel injector services for more than five years and has taken this experience to optimize and add to its processes. DeatschWerks is now a one-stop-shop for fuel injector testing and service. These services meet a large range of needs, from the enthusiast who requires basic product cleaning, rebuilding and testing to the calibrator who requires advanced linearity and offset data to optimize idle, drivability and power in different applications and setups.

DeatschWerks Dynamic Injector Service ($20/injector) features a full tear down, ultrasonic cleaning, back-flush and rebuild of all replaceable seals, o-rings and filters. Then DW performs a comprehensive dynamic flow test at various pulse widths to simulate real world driving conditions. If desired, a pre-test can be added ($5/injector) to compare before and after results.

DeatschWerks has also added two advanced testing procedures available for $75/test ($125 for both tests). The linearity test provides both minimum pulse width and maximum duty cycle recommendations. In addition, the linearity test shows the slope (linearity) of your injector at low, medium and high pulse width conditions. The battery offset test provides offset data at a wide range of voltages and pressures. DeatschWerks can customize this test to fit your exact needs. This data is crucial for tuners and calibrators needing injector characterization data to aid in setting up an aftermarket ECU.

For more info visit www.deatschwerks.com/fuel-injector-services.

LUMENS
High Performance Lighting OE HID Replacement Parts

For those with vehicles that come with Xenon HID systems, Lumens offers replacement parts for OE Xenon HID systems. Whether you are looking to replace a burned-out part or looking to upgrade to a different colour temperature, Lumens offers quality replacement parts. From  the most common D2 systems to less common D1, D3 and D4 systems, Lumens has all the parts to get your Xenon HID system up and running. Unlike the original equipment offered for replacement by vehicle manufacturers, Lumens High Performance Lighting replacement parts offer excellent quality at affordable prices for consumers.

For more info visit www.lumenshid.com.

LUMENS
High Performance Lighting LED Flasher Relays

These flasher units are designed to slow down the flash rate of LED bulbs used for turn signals and hazard lights. Lumens offers 18 different flasher relays for various vehicles. If a vehicle has a flasher relay, these upgrades are simple, cost-effective alternatives to load resistors. Swapping existing relays with Lumens LED Flasher relays is easy because it avoids having to cut and splice resistors into factory wiring. Resistors produce heat over 100 degrees. For this reason, LED flasher relays are a safer route than load resistors. Excellent for matching up with your new Lumens “Switchback” (dual colour) LED bulbs!

For more info visit www.lumenshid.com.

McGard
Black Wheel Locks, Lug Nuts and Lug Bolts

Black chrome finish has a deep reflective look that will enhance the look of any wheel. Use them on black wheels for a monochromatic look or on silver or chrome wheels for a contrasting look. McGard® lug nuts and bolts are guaranteed for life not to chip, peel or rust. Our one-piece wheel lock design is easy-to-use and has been protecting the world’s finest wheels and tires from theft since 1964. Most are available in Wheel Installation Kits, which include everything you need to install your new wheels in one convenient package! High-quality products made in the USA are your best value. Also available in bright chrome. Available at better retailers in your area.

For more visit shop.mcgard.com.

ORACLE Lighting
Cree LED Reverse Bulbs

The Oracle Cree reverse bulbs are a safe and easy way to upgrade the look of just about any vehicle. Just remove the Halogen bulb and plug in this high-output Cree LED. No need for ballasts, inverters, resistors, etc. – it’s plug and play! The T10 LED bulbs boast three watts of light output while the 3156 and 3157 outputs five watts each. Cree LEDs are not only brighter than factory reverse bulbs; they deliver a cool white hue and just a hint of blue for that “HID” look. These LED bulbs put off less than half the heat of the original halogen bulbs, which will keep your lenses clear and untarnished for many years. For vehicles requiring T10, 3156 or 3157 replacement bulbs.

For more info visit www.oraclelights.com.

ORACLE Lighting
HOD Bulbs

Oracle HOD bulbs deliver outstanding light output for a fraction of the cost of HID kits. HOD bulbs increase nighttime visibility and are far brighter and safer than stock headlight bulbs. These 55-watt Xenon-charged bulbs have wider road coverage for increased visibility and safety. Installation is easy, there’s no need of adapters or ballasts. Available in Super White (6,000 K), Hyper Yellow (3,000 K) and Crystal Blue (12,000 K) in the following styles: H1, H3, H4, H7, H10, H11, H13, 9004, 9005, 9006, 9006XS and 9007.

For more info visit www.oraclelights.com.

Philips
LED DayLight Daytime Running Lights

Philips LED DayLight Daytime Running Lights deliver the best of both worlds – styling and safety. Get the stylish lighting look of high-performance as seen on today’s high-end vehicles and, at the same time, increase your visibility to other drivers and pedestrians. High-powered Philips LUXEON® Rebel LEDs project a powerful bright white light and a beam wider than the average LED DRL. They also extend the headlight life by letting you switch to LED in the daytime. Offered in four- and eight-lamp configurations, the DRLs are easy-to-install and come with plug and play connectors, snap-in mounts and complete mounting accessories.

For more info visit www.daylight-led.com or call 1-800-257-6054.

Philips
Crystal Vision Ultra Headlamp Upgrade BulbsLight Daytime Running Lights

Philips Crystal Vision Ultra Headlamp Upgrade Bulbs light up the night with the extreme blue/white look of HID. At 4,000 K, no other Halogen bulb is whiter. These Xenon-powered Halogens also make a statement during the daytime with a blue cap that creates a distinctive blue reflection. DOT compliant and street legal, Philips Crystal Vision Ultra is available for practically every sweet import or domestic ride – car, truck or SUV.

For more info visit www.philips.com/automotive or call (800) 257-6054.

Snap-on
PH3050B Air Hammer

A true classic has just gotten better. The Snap-on® Heavy Duty Air Hammer (PH3050B) now has the Quick Change Chuck Retainer (PH200D) installed on the tool for added convenience.

The features and benefits of the Snap-on Heavy Duty Air Hammer (PH3050B) are:

• Dual elastomer cushions absorb shock and vibration to reduce user fatigue.
• Phenolic (Kevlar® reinforced) flutter disc provides long life.
• Direct multi-port front exhaust keeps air and debris away from user.
• High-grade steel barrel provides greater strength than some competitor models.
• Variable-speed soft-touch trigger provides featherability for greater control.
• Four-position built-in air regulator varies power for different applications.
• Air line screen helps prevent foreign particles from clogging trigger mechanism.
• Hardened steel piston delivers harder blows for maximum impact.

For more info visit www.snapon.com/powertools.

Snap-on
3/8-inch Shallow Swivel Impact Socket

With its full 30-degree uninterrupted swivel action and Flank Drive® wrenching system, the new Snap-on® 3/8-inch Drive 12-point 3/8-inch Shallow Swivel Impact Socket (IPDF12A) makes removal of stubborn fasteners easier and faster, improving productivity and performance. Some of the features and benefits of Snap-on’s new 3/8-inch Drive 12-Point 3/8-inch Shallow Swivel Impact Socket (IPDF12A) include:

• Laser-welded pivot pin giving it smooth, full 30-degree uninterrupted swivel action, which allows efficient power transfer prolonging the life of the socket.
• 30-degree uninterrupted swivel action also means greater accessibility in tight quarters, allowing easier and faster removal of stubborn fasteners thus saving time.
• Heat-treated to a lower hardness adds impact resistance and toughness allowing for a longer socket life.
• Flank Drive wrenching system: the socket delivers up to 15% to 20% more turning power, which requires less use and abuse of your power tool and sockets.

The many applications for the Snap-on 3/8-inch Drive 12-Point 3/8-inch Shallow Swivel Impact Socket (IPDF12A) include: Ford® F550 truck drive shaft bolts, U-Joint bolts for GMC® trucks and MT 45 Freightliner drive shaft bolts.

For more info visit www.snapon.com/handtools.

SPARCO
R505 SEAT

Over 30 years of racing experience and cooperation with the most important supercar producers has allowed Sparco to develop the widest range of sport seats for everyday car enthusiasts. The ergonomic shape of the Sparco R505 seat will cradle you in your seat in high-G corners and generate higher levels of comfort during aggressive driving. The R505 features a Micrometric backrest adjustment, high resistance Jacquard fabric, three- or four-point harness compatibilityand homologated to ECE 17 European seat safety standards.

For more visit www.sparcousa.com or call (800) 224-7223 or (905) 822-7223 in Canada.

VP
C85 Ethanol Racing Fuel

For racers using E85 fuel, VP’s new C85 race fuel is definitely worth a look. Conventional E85 fuels are corrosive and inconsistent with wide variations in ethanol content that pose constant tuning challenges. By contrast, C85 is blended with a consistent proportion of ethanol and other components in every drum, taking all the guesswork out of tuning. C85 also offers significant performance gains over conventional E85, including up to 4% more power and torque. It’s also superior in terms of cooling effect, detonation protection and it includes corrosion inhibitors to fight issues with ethanol. C85 will work well in drag racing, oval track, off-road and virtually any other automotive racing application. If racers have already invested in an E85 carburetor and the upgraded fuel system it requires, C85 is the most cost-effective choice for balancing performance, cost and extended engine life.

For more info visit www.vpracingfuels.com.

Yokohama Tire
AVID Ascend

The AVID Ascend features Yokohama’s Orange Oil technology, which is designed and developed through our motorsports involvement. This premium touring all-season tire delivers longer treadlife, better grip and a smaller carbon footprint. It has an industry-leading unlimited kilometre treadwear warranty. Available in 45 sizes ranging from 15- to 18-inch rim diameters.

For more info visit www.yokohama.ca.